January 2012

san_g

hi can anyone tell me where the crankshaft timing marks are on a citroen c5 2000 hdi 03 plate thanks sandra Read more

RickyBoy

Mrs RickyBoy's newish Fiesta needs its coolant topping-up. We have at least half-a-litre of Renault's own-brand leftover from her last Clio which was bought in the past 12-months.

Is there any danger in pouring Renault pre-mixed stuff into a Ford or should one really stick to the respective manufacturer recommended liquids?... Read more

corax

Easy peasy look at the reg date and add 10... Even I at my advanced age and diminished intellectual powers (did I have any anyway?) can do that. :-)

Yeah, I know madf, I was being a bit tongue in cheek....

Rodeo

Hi I,m most impressed with Simon at Mechtec.I have had all symtoms and two return Green Flag collections (very good) Having taken off and looking at No21 and found no melting point at all I then turn to Dash.Please take me thru how to remove as I got so far then felt I was getting into unknown territory.Any help will be gratefully accepted Thanks Rodeo Read more

fredoj

I jacked up the rear of my citroen (c5, diesel, 2005 model, must be on hydractive III ) to change the wheels, upon completion, the rear suspension would not come down, I am not sure but when it was jacked up, I might have pressed the down button. Do you think this confused the computer system? or something is dislocated? The height switch button in the car is working and is able to raise and lower the front suspension There are no error messages on the control panel I took it to a local garage that claims they are the only citroen dealers in the country, but they could not touch it claiming they are used to other suspension but this one is electronic

I am on a mission to find a solution myself, I know I cannot get underneath the car for safety reason so will have to take it to a ramp What should I look for? I am assuming probably a mechanical arm is dislocated and therefore the height control valve on the rear is not receiving instructions, or it could be the spheres that need replacement (it was making some noise prior to that) could someone post photos of what the underneath of a Citroen c5 2005, hydractive ||| looks like for comparison purposes please? Read more

Homer's Honda

Has anybody you know fitted aftermarket cans to an 02 VTEC ABS with Givi 3 peice racks? I may have a problem with fitting behind the side racks.. Read more

Big Clive

My 'smart' ignition key that locks/ unlocks the car remotely has failed through age and the 'lock' button has become spongy and does not work. Does anyone know of a good replacement key specialist who charges reasonably for replacements? Read more

Trilogy

http://uk.news.yahoo.com/30-000-minis-recalled-fire-risk-195729070.html Read more

unthrottled

Minis are starting to look more and more overpriced every day....

unthrottled

Well, now that we've got a bit of respite from the damp, grey, blustery weather and are enjoying a snap of 'proper winter, I thought that I'd start a thread of cold weather driving.

This year, I've started using the hot water on the windscreen de-icing trick. Fantastic! Thermos of hot water all over the windscreen and rear window, jump in and find that the heat has already demisted the inside. Crank and go. No scraping, spraying aerosols, idling for ages with the fan blowing cold air all over the place. And it is free.... Read more

unthrottled

That's a new one to me-I'll take it as a compliment, shall I?!

JohnCC

I wonder if this would actually work in the UK?

http://www.youtube.com/watch?v=LNrLfylgHE0 Read more

balleballe

It seems to make more sense buying a new car nowadays if one is looking for a diesel

I would never buy a new petrol car though. The newest i'm prepared to go it at least 1 year old with around 20k on the clock and around 30% off the original price as a result

TJ4000

hi there , we sell these seal kits they are a 2pc seal kit

please contact hydraulic & transmission services ltd, cannon street, salford, lancashire m3 6jh tel : 0161 834 7666... Read more

TJ4000

i also do TJ1500 & TJ2000 seal kits

I also do many seal kits to you sample