May 2010
hi room, was doing the pre MOT check over, apart from the split in the back box i noticed the sill rear of driver door very bad, its the car outer skin that wraps under the sill thats gone
but its solid underneath that, so is it cosmetic or a fail?... Read more
My Chrysler Voyager 2.5 diesel 2001 (y reg) cuts out at idol/low revs and the idol speed dips and rises on its own without touching the accelarator. I am particularly concerned as sometimes the engine cuts out when pulling away from a junction and leaves us stranded in the middle of the road. A local independent garage has suggested the injectors may need replacing but they are not sure and we do not want to pay for guess work. Please help! Read more
Hi,
If any of you read my last problem with this car....you'll know that I have tried and tried to sort it's little problems.... Read more
Have you done a brim to brim tank test to make sure this is the mileage? How many miles have you tested it over? Are you sure someone is not nicking your petrol?
Recently bought a Clio and have replaced battery and alternator but it packed in yesterday and is showing a Zig zag warning light.
The immobiliser seems to be working okay but there is no power now. Engine not even attempting to turn over. Have tightened up all the parts including alternator belt which had worked loose. Tried charging battery but to no avail, it's just dead. Can anybody help with some advice please? Read more
Hi,
... Read more
Hi guys.Just replaced a dual mass and clutch today along with a couple of belts and tensioners.Now noticed a rumble from the induction.When i disconnect the MAF the rumble goes.Switch car off and reconnect and switch back on and the rumble reapears.Anyone any ideas?Not bad just annoying?Thanks again guys..
Read moreRe a 56 reg Octavia 2.0 PD TDi purchased s/h in good condition ex fleet late 2009. Came with well-reviewed tyres, front 2 x Michelin Primacy HP w 6mm tread, rear 2x Pirelli P7 with 4-5mm tread, tyres been on 2 yrs done 35k miles. One rear Pirelli punctured at the w/e and put on the spare - a Dunlop SP Sport 01A with 8mm tread. Been used, as muddy, but 8mm tread.
Should I replace both rear tyres to ensure two same (per all vehicle/tyre manufacturer advice) or would that be overkill given the spare had 8mm tread?! Owner's manual says 'Never fit tyres which have already been used without knowing their previous history', but what's the risk? What should I be looking for? The DOT manufacture date was 3306.... Read more
It's personal choice at the end of the day to be honest but replacing both would technically be safer than just replacing one.
If it were me and the spare was ok I'd be inclined to put that back in the boot knowing you have a good tyre for emergencies and put two new tyres on the rear to ensure you have a good set across the axle....
Hello Everybody,
I have just agreed to purchase a Honda Accord Tourer diesel automatic from a Honda dealer (13 months old & 8,800 miles) - as this will be my first ever automatic car can any auto experts advise on how often the ATF should be changed ?... Read more
I have the CRV with the same engine and gearbox and I am not planning on changing my ATF unless they do it at as part of their routine schedule.
You need to note that Honda have reduced the max towing weight for these vehicles to 1100KG I believe
Hi guys,
Just recently bought my 1st recovery truck. Wanna get a new full set of tyres, I carry all sorts of vehicles on my truck.... Read more
I am looking to purchase a Mini Cooper convertible using PCP. The Honest John's Best PCP Deals does not appear to feature this model.
I have not purchased a car through this type of finance model before, can anyone recommend a company that provides both a good service and value for money?... Read more
Thanks Avant that's very useful information.
.jpg)
I am currently having the same problem and being told by chrysler there is no problem. I have found lots of people who have the same problem now, so its proof there is something wrong with the car. I am trying to get in touch with everyone so we have proof of a bigger issue. I am currently taking this up with the ceo of chrysler the the MD of Fiat in the UK.
please email me with your details. Many thanks...