July 2013
I have problems getting into gear first thing in a morning, but after 2 or 3 minutes of driving this is no longer a problem, any advice? Read more
Possibly that Borg & Beck design where the slave cylinder is integrated with the release bearing (like a sort of telescopic doughnut). Plus side, self adjusts and there's no actuator fork / linkage gubbins. Minus side, a b*tch to replace.....
Can someone please help . I bought a great little fiesta van last week everything worked perfect , but the old owner couldn't remember when it was last services , piece of mind told me to get it serviced and that's all great , but the garage must have disconnected my battery and now I've lost my radio , need a code but there's not one in my paperwork can someone please help
M045710 is the serial number , any help much appreciated Read more
Can someone please help . I bought a great little fiesta van last week everything worked perfect , but the old owner couldn't remember when it was last services , piece of mind told me to get it serviced and that's all great , but the garage must have disconnected my battery and now I've lost my radio , need a code but there's not one in my paperwork can someone please help M045710 is the serial number , any help much appreciated
1192
car making lotta noise. found out it was water pump on way out. new belt and pump.better but still noisy. found out that no oil been getting to rail above camshaft.cleared oil rail. no better. ran for a minute with rocker cover off and held white card btwn rail and cams. not a single drop., ran with rail removed . not a drop. poured oil down hole and went,so not blocked. any ideas plz? Read more
You sure you didn't pour oil down the drain channel?
If the feed really is blocked you might be able to free it up with compressed air....
Hi
In a bit of dilemma. Got a late 2007 325i Touring with the N53 direct injection engine in 2010 as an approved used BMW and have extended the warranty twice so still covered. I like the car a lot to drive and does everything I need. Dont do a lot of miles so the MPG not critical. ... Read more
Sorry - a bit slow there but I normally operate in the evenings. Gone now, I hope for good!
www.bbc.co.uk/news/uk-england-23320526
The Bestival coach that crashed last year had a 19.5 year old tyre on one of the wheels, which failed, causing the crash. How on Earth do you get away with using tyres that old?!!! Read more
the age stamp on car tyres is not coded .. it's fairly easy to read and understand ... when I bought my winter tyres in 2010 they showed xx09 in the date field - indicating week xx in year 09 (cannot remember the week in question)
from the independant.
... Read more
Hi
... Read more
Thanks for the reply, any idea where it is?
Rust makes a comeback??
I get the impression Nissan are taking a 'leaf' [note, sorry]..out of Reggie Renault's book?
...
Hi,
Recently, my car wasn't running quite as it should, so I ran my diag tool on it and it came back with the error P1402. This is reporting that the EGR orifice is restricted. This has been confirmed by my local Ford dealership.... Read more
Before shelling out £££ to the main dealer, i'd be inclined to nip round to a good Diesel workshops (ask good OD taxi drivers unless you know of one) , they might well remove this troublesome item and clean it out properly instead of throwing new parts at it.
I know lots of owners on the BMW forum clean theirs out, it might be worth a search on PSA forums for cars with the same engine for full instructions if you fancied DIYing.
Browse
