Hi. Battery has been disconnected and I do not have the code for the radio. Can you please help.

Serial No: B301259 Read more

Hi all
Reversing lights have stopped working on above 2010 car. Sensors still work. Bulbs both OK. There is no live feed to rear reversing lights when in reverse gear.
Auto electrician has spent 3 hours on it, traced all wiring for continuity, and found no issues around tailgate gaitor. A live feed is coming off gearbox to control unit when in reverse, although it's hard to trace whether it's a multi pole switch that may have a separate feed for the reversing lights - all extremely complex and may even be an internal switch on powershift gearboxes?
I have disconnected battery for an hour to do an ECU reset and still no change.
There are no fault codes present.
The auto electrician and local garage are suggesting an ECU module change, so a very expensive fix. It's a post Feb 2010 so everything is module controlled rather than conventional switches, relays and fuses.
I'm at a real loss as to whether to spend this sort of money when there's no guarantee it will fix it, although there isn't a lot else to try (unless we try and wire reversing lights from a live feed to reversing sensors, can't image that is simple).
Any advice or experience would be really appreciated.
Many thanks
Andy Read more

I've just had a full new set of tyres fitted to my 2013 BMW 5 Series Touring at 29,000 miles, the garage also did a wheel alignment check, and some adjustment was made to the toe on all 4 wheels. My fuel consumption has now increased from around 53-54 mpg to consistently under 50. The new tyres fitted were exactly the same as the originals (Pirelli Cinturato P7s). The garage has rechecked the alignment and says everything is okay, but the fuel consumption has not improved. No other servicing has been performed. Could re alignment have such an effect?

Thanks Read more

I'm curious. As i bravely sign up for my second speed awareness course.

What % of UK drivers have points.... Read more

I have had a clutch replaced the Peugeots main dealer they told me that the fly will did not she is changing and when I got my car back the clutch was juddering I took it back they replaced the clutch again and told me that they have to replace the flywheel I now have my car back and it's juddering and the pedal is making a squeaking noise and a clanking noise could this be the fork that is bent and not pushing bearing flush against the pressure plate please someone advise me as I have to take the car back and I don't know what to expec Read more