Range Rover Vogue 54 model - Rear window washer leak

Honest John Back Room » Technical matters
View Threaded
Sat 12 Jan 2013 17:06
Range Rover Vogue 54 model - Rear window washer leak - petermburgess

Hi,

The rear washer works but also leaks inside the window and on the trim. I thought it could be accessed from outside, but this is not so. How do I remove the trim covering the wiper motor and washer at the top iof the rear window. I can not see any screws or fastenings to hold the trim in and do not want to use brute force without knowledge.

Peter Burgess

Reply | Report as offensive | Link
Sun 13 Jan 2013 18:36
Range Rover Vogue 54 model - Rear window washer leak - christatedavies

Would expect the rear washer is pretty powerful, and in the cold, if there is a little frozen water it can forceably 'pop' out the piping, I know this happens with a few 'premium' cars. The best tip is to not use the washers unless you know they are not frozen...

Anyway, I found this thread on another site, might be helpful:

www.landroversonly.com/forums/f40/removing-trim-ca.../

Are there any Range Rover badges, like plastic plugs in the trim? You can usually level these out with a flat screwdriver revealing screws...

Hope that might help you, its annoying when you can't find information, and I fully understand th hestitation to just start pulling...

Chris

Reply | Report as offensive | Link