Ask Honest John

Most recently answered diy mechanics questions
I have a Nissan Micra K11, what are the torque values for the rocker cover bolts, because of a leaking rocker cover gasket which I am going to replace.
I'm an ex mechanic, been out of the motor trade for 15years, but continued with engineering in industry. Do I need any special tools for the cam belt change, like locking pins etc? Never done one on...
How do I change the fuel filter on my Citroen Dispatch. It's a solid state type.
I have used the same mechanic for a number of years as he was going on his own from leaving a Ford Dealership. He always had good prices and did evening work, which suited me. About 18 months ago I had...
I know how to change the pads on a Fiesta 2007 model, just wondering if its still safe to push the pistons back using a g-clamp, as some people have described. I used to do it on the old models, is it...
The fuel injector pump went on my X-reg Ford Focus TDI 1.8-litre with the Endura engine. I've replaced it with a secondhand one but still no joy! Does it need reprogramming to match it up with the car?
How hard is it to get hold of a 1.7CDTI engine for a 2004 Vauxhall Astravan, and what sort of money will it cost? Also, how hard is it to replace?
Can anybody tell me what seals I need for the air conditioning system on my Focus? I took it to a local garage for a top up and was told that seals were leaking. I looked on the web and can't find any...
I would like to service my Renault Scenic's air conditioning system before I hit the road, as it is a bit smelly and not powerful. I would like to do it myself on a budget. What do I need? I just ordered...
I bought a Toro mower with a TUD 5 diesel that had broken a timing belt and bent a few valves. I got a new head from the UK and put all back together with great results. However, after two seasons of running...
 

Value my car

Save £75 on Warranty using code HJ75

with MotorEasy

Get a warranty quote

Save 12% on GAP Insurance

Use HJ21 to save on an ALA policy

See offer