Showing results in  Forum [Show all channels]

Sort by: Relevance | Newest first | Oldest first

• Peugeot 106 - Peugeot 106 1.4 (1997) - Front RHS brake binding 20 Jan 2015 (Forum)
  Hi all, After a recent driveshaft/wheel bearing change on my R-Reg 1.4XR, I found that the OS brake is now binding. I have checked/replaced several parts and found that the caliper piston is causing the inner brake pad to act on the disc; it's not fully binded, but drags on the disc and causes a loud noise when driving.
• Peugeot 307 (2001 - 2007) - 03 2.0 Knocking noise on braking 24 Apr 2009 (Forum)
  Now it has started coming on when I hit around 70mph, never at lower speeds. Always goes off again though on stop and restart. Today, on braking started to feel a little bit of knocking, progressivly got worse, definite knock, clunk, knock on braking, brakes appear to be working as well as they always did though. Any ideas, could this be a problem with the ABS, if so any ideas what and how much the darn Pug is going to cost me this time.
• Ford Focus - brakes...are they working? 2 Nov 2004 (Forum)
  You're thinking I have the motoring equivalent of hypochondria - I haven't really - I'm just being a perfectionist. Brakes - as you may have guessed is the problem I've decided on today. The car does stop. The brakes don't seem to grind leading me to believe it isn't the pads. I wouldn't even say there was excessive travel in the pedal - nor is it spongy but it doesn't seem to have the bite it used to have.
• astra brake light problem 23 Oct 2003 (Forum)
  Can anyone suggest a solution to my problem with the brake lights on my son's 1.6 P reg Astra premier, Im minding the car for him whilst he's working away, It,s not getting a lot of running coupled with me being away on holiday, when I came back and tried to start It the battery was'nt up to the job, now normally I would just put the jump leads on it but I'd had this gadget in the boot for ages unused that works by transfering power via the cigar lighter sockets, the Idea is to just plug in and wait for enough power to flow into the duff battery, anyway It did'nt work and so resorted to the trusty jump leads, the problem now is that the brake lights won't go out as soon as the ignition is turned on, my own theory is that it may have blown a diode allowing power to flow from another source and feed the brake lights, but where are they located and what do they look like?
• Audi 100 brakes 9 May 2003 (Forum)
  Audi 100 estate a couple of months ago, since we are renovating our house and it's handy for shifting materials and rubbish. It's been fine since i bought it up until today. Driving home from work, the brake warning light came on. I stopped and checked the fluid level, and it was fine, so i carefully carried on home. Then, the brake pedal stiffened up considerably, so i needed to use all of my 17 stone to stand on the pedal to bring the car to a stop!
• Fiat Punto Evo, 1.4 8V, 2010. - ODB code P0555 24 Jul 2022 (Forum)
  I am getting on a regular basis P0555 Brake Booster Pressure Sensor. This code can be cleared for a while. Checking around the brake master cylinder there is no evidence of a sensor. The servo is mounted inside the car behind the dash. No easy access.
• 2007 Citroen C5, 2.2 HDi Twin Turbo - Brake Master Cylinder. 14 Dec 2021 (Forum)
  It seems my Brake Master Cylinder is slowly failing at only 160,000k  / 99,000Miles. I'm having trouble locating a replacement down here in Australia, either factory or after market, so looking further afield to find it.
• Nissan Micra 20000 - Guys, please help, how much would this cost to fix 30 Jun 2017 (Forum)
  Hi guys, so today my car failed its mot on the following: rear parking brake recording little or no effort nearside (3.7.B.6a) rear brake binding nearside (3.7.B.1) parking brake: efficiency below requirements (3.7.B.7) how much will this cost??  thank you so much :)
• hyundai santa fe auto diesel - disc brakes 24 Jun 2016 (Forum)
  any help please having trouble with front discs brakes getting very hot garage telling me this is no cause to worry ,after 2 miles you cannot touch the discs and wheel is getting hot twice i have had scraping noise for about 30seconds then it goes away .only had car 2 months never noticed this problem untill two weeks ago evelyn
• Fiat 500 - Fiat 500 Squealing Brakes? 5 Apr 2016 (Forum)
  Our 2010 Fiat 500 1.2 Lounge has developed an intermittent high pitched squeal whch seems to come from the front wheels (difficult to tell but seems to be RHS). Sounds like disc and pad rubbing as the squeal disappears when touching the brake. Also disappears with right steering input and can appear with left steering input. Difficult to demonstrate to a mechanic as is so intermittent. Any ideas as to the cause and cure?
• 2005 FIesta - Replacing front brake discs seized rounded bolts 10 Mar 2015 (Forum)
  I was just wondering if its possible to renew the discs without removing the brake caliper cage as last year i could not get the bottom bolt losse so i just split the caliper by removing the two allen key bolts and replaced the pads that way and as dont have acces to any heat to warm the seized  bolts up any advice would be welcome.
• Ford Focus 1.6 TDCi 110 DPF - 2009 Ford Focus Brake Torque Settings 15 Feb 2013 (Forum)
  Hi all... I've been looking high and low trying to find the Brake Caliper bolt torque settings, I just wondered if anyone here might be able to help please? I have seen 130nm mentioned but that was for a US 2005 model and I think they are different. Many thanks if you can help.
• Mercedes-Benz CLK-Class - Brake Servo Unit replacement 9 Jan 2013 (Forum)
  I took my vehicle into the garage and mechanic advised me that the switch had gone in the Brake Servo Unit. Apparently, you can't buy the switch, you have to buy the whole unit, which has to be shipped over from Germany.   Anyone know where I can get a unit that doesn't cost the earth?
• Daewoo Matiz 2002 800cc - Matiz brake hose round or square 10 Aug 2011 (Forum)
  Can anyone help us please. My son needs a new front brake hose on his 02 Matiz 800cc. The hose currently fitted has a round banjo at the caliper end, but all the hoses we can find have a square banjo. Are they interchangeable?  I dont want to start the job and find that the new hose won't fit.
• Peugeot 306 - dot 5.1 brake fluid...is it worth it? 8 Aug 2011 (Forum)
  Im replacing pads/discs and fluid soon and heard a few people mention dot 5.1 would give a firmer pedal feel. I was wondering if its worth chaning from dot 4.1?  If so can I just bleed the brakes as normal and top up with 5.1? Im also looking at getting the calipers reconditioned.  Can anyone recommend a good place to get this done?   cheers
• Mercedes B Class 180CDI Auto 2006 - Appling the brake down hill 13 Jun 2011 (Forum)
  Mercedes B Class 180CDI 2006, when appling the brake down hill causes the engine to race and rev up. I have returned it to the garage who have not been able to find anything wrong. if this problem can't be solved can I reject the car as I am losing confidence in this car I have had under 3months?
• Vauxhall Zafira A (1999 - 2005) - front & rear brake pads 18 Apr 2011 (Forum)
  need to do my brake pads soon and reading in the haynes manuel that you need apecial tool to push the calipers in. as the rear ones are on a thread so you have to twist as you are going i thought i could use a g clamp like on other cars i have had or not does any one have any ideas as im a bit stuck many thanks
• 1997 audi a4 avant - brake warning light 1 Apr 2011 (Forum)
  i have a red brake warning light which comes on every time i drive my car after i drive a very short distance it beebs 3 time then the red light flashes contiuously until i turn the car off, there are new pads an disc in this car!!
• SEAT Leon FR petrol - Brake imbalance?? 27 Oct 2010 (Forum)
  My Leon just celebrated its 3rd birthday with an MOT pass - but only just. Advisory note says 23% front brake imbalance and mechanic was surprised I hadn't noticed pull to one side.  I have since tried normal, firm and emergency stops with no grip on the steering wheel and the car pulls up dead straight.
• Mazda 6 - 2005 - Rear Brake pad replacement 26 Sep 2010 (Forum)
  Hi, Serviced my Son's car yesterday prior to MOT next saturday. I noticed the rear brake pads are low and will need replacing in the near future. Will I need a special tool to turn the caliper piston back in like many cars do? Does the piston have slots in it that you can get a rair of curved pointed nose pliers on?