Ive run the heater test (heater doors and cooldown) and it failed. Now I am left with flashing lights and I dont know how to fix the heater problems that the diagnostic shows and I can't afford either. Can anyone tell me how can I stop these lights from flashing?
The fuel gauge is not working on the dashboard since doing this test also. I don't know if its related to the test but it happened just after.
Thanks,
Nikki
|
Am i correct you have been reading the Ecu for fault codes stored?
Now another fault has come up, you could take the neg lead off the battery for 30 seconds this "may" re set the ecu and put all back it worked on another car.
|
|
|
