Polo Clutch Drag - Peter D
Hi,

VW Polo 1.3 AAV engine 5 speed box.

I had to remove the clutch cable to allow access when repacing a drive shaft. On reconnecting the cable all seemed OK and the auto adjuster retored the bite position of the clutch but when disengaged the clutch is dragging and causing gear selection to be difficult from stationary although the syncro ring bring the bos to a halt a it engages but reverse is not nice so I have to turn the engine off then engage reverse and restart.

I've check the cable and the travel of the clutch lever and it is travelling to the end stop but just appears to be dragging.

Any ideas on this one.
Polo Clutch Drag - Robert Fleming
Replace the cable with a manually adjusting one.