Forte gas treatment / sticking valves. - The Godfather
My wife has a 1995 Vauxhall Tigra which I suspect has been suffering with sticking valves brought on through short trips and supermarket petrol. We have been filling up with Shell/Texaco and recently Optimax which has made a big difference. I would like to complete the job by adding 'Forte gas treatment'.
Could anyone tell me were to source 'Forte gas treatment' in the Lancashire/Merseyside area? Also could you give me an idea of how much it costs?
I don't understand why it is supplied only by garages, how difficult can it be to pour it into a fuel tank.
Forte gas treatment / sticking valves. - Sooty Tailpipes
It is usally sold only to main dealers as a "value added' 'rip off' on the services they do.

Try Fiat dealers, I have seen them in two of those.
Forte gas treatment / sticking valves. - Aprilia
Well, my 'Unipart' shop at the local Rover agent sell it. I paid about £7 last time I bought some. You could ring Forte direct and ask them for local distributor.
Forte gas treatment / sticking valves. - mark
National Tyres Depot in Runcorn had some last time I went in as well as the diesel version £9.99 a bottle if I recall correctly. I suspect other National depots might carry it worth a phone round.

regards

Mark
Forte gas treatment / sticking valves. - Adam Going (Tune-Up)
Hi Godfather,

Far from being a "value added rip-off" it really is very good and worthwhile, in my ever so humble (30 years in the trade) opinion, having been using it and - yes - selling it for many years.

Suggest you contact Forté Lubricants on 0247 647 4069 to establish your nearest stockist.

Regards, Adam
Whatever is rightly done, however humble, is noble.
Forte gas treatment / sticking valves. - DL
I'd echo Adam's sentiments aswell. Good stuff is this Forte 'potion'!
Forte gas treatment / sticking valves. - Godfrey H {P}
In what way is this product beneficial Adam? If one uses one of the major premium brand of petrol and you don't do short school run type motoring surely this product is just a profit centre for main dealers who use it to bump a regular service bill.
Forte gas treatment / sticking valves. - jc
If you can buy it for £10 and a dealer charges £25,he gets a nice little earner.
Forte gas treatment / sticking valves. - Marcos{P}
Sorry to sound so stupid but could someone tell me what exactly this stuff does and when it should be used.
Forte gas treatment / sticking valves. - Godfrey H {P}
Enhances main dealership profits. Seriously have a look at:
www.forteuk.co.uk/index2.html


I'll get me coat.
Forte gas treatment / sticking valves. - Adam Going (Tune-Up)
Forté Gas Treatment is specifically formulated to remove carbon deposits. As it does not completely combust in the cylinder it is particularly useful in cleaning the exhaust valves and ports. It can also be improve Oxygen Sensor and Cat functions. It is therefore very effective in cleaning up an engine that does predominantly short runs. It does not attack the gum and varnish deposits typically causing injector problems - the same company\'s Fuel System Cleaner should be used for this. They can be used together.

Modern high-spec fuels are better at KEEPING an engine clean in these respects, but rarely attack deposits and fouling once it has built up.

Regards, Adam


Whatever is rightly done, however humble, is noble.
Forte gas treatment / sticking valves. - Godfrey H {P}
Fair doos Adam but I do object to the mark up main dealers slap on.
Forte gas treatment / sticking valves. - Adam Going (Tune-Up)
Absolutely, Godfrey, but you need to speak to that nice Tony Blair about re-introducing retail price maintenance I am afraid !

I sell Gas Treatment for £8 + VAT, and make a reasonable profit. Nuff said ?

Regards, Adam
Whatever is rightly done, however humble, is noble.
Forte gas treatment / sticking valves. - smokie
I agree Godfrey but there probably isn't a huge turnover for the stuff so the cost of holding stock means a larger than usual margin is necessary to make it economic for the retailer. I'm not sure about this, but it would seem sensible logic. Whether the size of margin which you indicate is really justified is another matter.
Forte gas treatment / sticking valves. - DL
We religiously add gas treatment (to petrols engines) and injector cleaner (to diesel engines) at each main service, priced at £7.50+VAT. I cannot remember the last time we had to pull a diesel fuel injector for servicing.......
Forte gas treatment / sticking valves. - Andrew Moorey (Tune-Up)
A colleague of mine had to replace the head gasket on the Rover 214 belonging to the wife of the (then) local Forte Rep.This car was treated with Gas Treatment at every service. With my hand on my heart, when the manifolds came off that engine the intakes and exhausts were literally spotless. Sold me on the stuff!
Andrew


Simplicate and add lightness!
Forte gas treatment / sticking valves. - Godfrey H {P}
Well, at least Adam and DL charge areasonable price for it. I was charged an outrageous price for it before I wised up to what it was. It was double what Adam and DL are charging. It prompted me to find the Forte web site. They've changed it now but it was all about how their stuff could enhance dealer profits. I'm afraid that got even further up my nose!
Forte gas treatment / sticking valves. - Godfrey H {P}
I shoud add I'm just about to change my car and I notice the new dealer is promoting the stuff. I will make a point of asking how much they charge and if it's more than Adam or DL I'll tell them no thanks i'll source the stuff myself. Adam, you've convinced me it's worth having but I'm not sure I do the type of motoring that would get full benefit.
Forte gas treatment / sticking valves. - Aprilia
Note that many manufacturers do not approve the use of these additives. If the car is under warranty then let the dealer put it in for you and take the responsibility for any problems that may arise.

Personally I am cautious about using these substances. The fuel system additives are basically a combination of a strong detergent and wetting agents. They will dissolve deposits - but the deposits have to go somewhere. Similarly the gas additive is a powerful carbon solvent - again it all has to pass through the engine and the cat.

I would be interested to know of any VM's that recommend or market their own additives.
Forte gas treatment / sticking valves. - Cliff Pope
< >

Impressive. So it has no tendency to cause head gaskets to blow then?
Forte gas treatment / sticking valves. - Andrew Moorey (Tune-Up)
No, the K series does that all by itself ;-)
Forte gas treatment / sticking valves. - Godfrey H {P}
Good point Aprilia. I\'ll ask the question \"Is it manfacturer approved?\" It will be interesting to see what sort of answer I get. It did occur to me it\'s not in the service schedule for my car.
Forte gas treatment / sticking valves. - Cyd
In the USA several manufacturers have been prosecuted for making claims about gas additives which cannot be substantiated by independant tests. Some of these companies have been forced to return millions of $s to customers.

About a decade ago Rover engineers at Gaydon (Rover Group, before BMW) tried to find out if several additives and bolt on economy devices were actually any good. After spending a fortune on test cars, track time, lab time and engineers time the project was canned as a waste of resources with no firm conclusions being drawn.

All this leads to cynics like myself tarring all these products with the same brush. I have tried a few myself over the years and found most to be unimpressive. The only one I have been half impressed with is Slick 50 Fuel Treatment. I haven't tried the Forte stuff, but based on Adams report I may give it a go in my car as it too suffers sticking valves when cold (a common problem on my motor).
Forte gas treatment / sticking valves. - Aprilia
Think you're right Cyd. BTW - did you work at Gaydon in the BAe days? I did some consultancy work there around that time (as did quite a few people!). Do you by any chance now work for an outfit that also makes showers ;-)

Anyhow, as regards additives - if the fuel system cleaner and gas additive does such a great job shifting 'deposits' what is it doing to the lubricant film on the bore (which is there to reduce wear)?