|
does anybody know what might be causing a creaking sort of sound coming from my drivers side back wheel area? the sound occurs usually when im setting off from standing.
|
One of the many rubber bushes??
Without knowing what car it is makes life very difficult with not even knowing the basics like front or rear wheel drive.
|
|
sorry i did'nt see the threads, my car is a 1997 mk1 d turbo
|
my car is a 1997 mk1 d turbo
Well that narrows it down a bit - not!!
Car make and model please.
DD.
|
Hang on, from a couple of you previous posts, I see it's a Pug 306. No need for the crystal ball after all ;o)
Duly added to the subject header.
DD.
|
|
|
|
Could even be brake bind?.As Martin said more info needed.
--
Was mech1
|
|
|
And the car is?
You've obviously not seen the couple of "sticky" threads I posted at the top of this page asking people if they can put the make or model of car in the subject header.
DD. BR Moderator.
|
Start off by checking basics such as shock absorbers.
Most likely to be the rubber bushes which sit between axle and chassis. I believe this is a fairly common problem on old pug 306 and cit ZX. The rear axle/torsion bar need to be parted from chassis and rubber bushes replaced. Not a small job, mounting bolts/nuts are somewhere under rear seats.
|
|
|
|
