Chrysler Voyager 2,5 td 1996 VM engine - how do I mesure temperature sensor voyager 2.5 td

Honest John Back Room » Technical matters
What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
View Threaded
Sun 22 Aug 2010 15:19
Chrysler Voyager 2,5 td 1996 VM engine - how do I mesure temperature sensor voyager 2.5 td - B.Santos
Hi, I´m having some troubles with my voyager, I would like to mesure the resistence between the 3 terminal but not sure what values should I consider, I have the haynes manual but the only thing it says is to read across terminal and I should have determinated resistence with determinated temp, but does not says with terminal because I have 3, one is ground and the other goes to diferent parts . terminal nº 1 and nº 2 (ground) goes to pcm , and terminal nº 3 goes to body control module.
the car wont rev after 2000rpm, I changed 1 injector, wastegate actuator (was leaking some air but opening at 1,5/2 bar ( more or less)), air flow meter air filter and fuel filter.
when I start the motor in cold it starts fine but at about 1000rpm , after 30 seconds it goes to 800 and starts to crank I have to give it some acelaration than stays fine, but if I disconect the temp sensor the rpm rises to 1000 and work fine with the fan at maximum.
Now after changed the fuel filter alot of air got trapped in the circuit ,and after bledding the circuit the car starts to crank everytime it´s on idle but if I disconnect the temp sensor goes fine, the boost problem still remais.
with the sensor connected starts to boost until 2000rpm and the losses the strenght, with the sensor disconected, does not give much acelaration and nothing happend at 2000 I noticied that the turbo starts to spin after 2000 but without much power.
I dont know what to do no more than to change the temp sensor??
help please.
Thanks
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide