Ford KA 2008 1.3 Zetec Petrol - Part location, EVAP Purge Valve.

Honest John Back Room » Technical matters
View Threaded
Mon 18 Mar 2024 16:09
Ford KA 2008 1.3 Zetec Petrol - Part location, EVAP Purge Valve. - Peter Todd

My KA is reluctant to start in the morning, I have replaced the plugs and ignition leads.

The garage laptop tells me the fault lies with the following:- EVAP Purge Valve. Apparently Ford do not now hold any in stock nor do the local dealers in Swindon.

Would anyone know where I might be able to purchase a new one? Or one in good working order or even a similar one that might be in another Ford. I tried Ebay but things got confusing and several suppliers do not answer any emails.

Many thanks for any help offered.

WW.

Reply | Report as offensive | Link
Mon 18 Mar 2024 16:22
Ford KA 2008 1.3 Zetec Petrol - Part location, EVAP Purge Valve. - elekie&a/c doctor
The purge valve may be faulty, but I doubt if this is the cause of your bad starting.
Reply | Report as offensive | Link
Mon 18 Mar 2024 16:26
Ford KA 2008 1.3 Zetec Petrol - Part location, EVAP Purge Valve. - skidpan

Be aware that the engine in the KA of this age (providing its not pne of the rebodied Fiat 500's) is not a Yamaha designed Zetec such as that fitted to the Fiesta but a Zetec Ro-Cam designed in Brazil. Its a SOHC iron block with a chain drive whereas the Yamaha Zetec is DOHC alloy block with a cam belt.

As far as I am aware parts are not interchangeable between the 2 so you need to be careful that you ensure they know which Zetec it is when ordering the part.

I believe the engines were made in South Africa, there may be a specialist importer of parts.

Reply | Report as offensive | Link