Ask Honest John

Most recently answered wheels and tyres questions
Please can you tell me how I calculate the wheel and tyre size for a 2005 Volvo V70? I want to put winter tyres on steel wheels for the coming winter. Clearly, the wheels will be a smaller diameter than...
My son recently purchased a secondhand car from a dealership in Dundee. When we first looked at the car we were pleasantly surprised at the condition of the vehicle and did not spot odd tyres on each wheel....
On the 23rd April I purchased a Jaguar XF Portfolio model at a cost of nearly £44,000. I have now covered approximately 700 miles and I find that the ride is very hard and not at all acceptable. The standard...
I have a 2004 Renault Scenic and am unable to remove one of the front alloy wheels due to the centre being welded to the brake drum. I have tried Plus Gas and hammering the rear of the wheel without success....
Can anybody answer if the 2007 Suzuki Jimny is prone to skidding on a wet road surface? My wife skidded on leaving a roundabout- speed circa 15mph - and the car ended up facing the wrong way.
I have a 2005 Jaguar S-Type 2.7 diesel sports version (lowered, stiffened and with spoilers). I have some well-worn Pirellis on the front and 30,000-mile Goodyears on the rear, all size 245/40/ZR18. I...
I have recently bought an Audi A4 2.0-litre petrol saloon on a 2004 plate. It has come with different wheels and tyres to standard, hence this request for help. Tyres fitted are Sunew 235 Z40 R18 95W....
I run a Skoda Octavia diesel estate and need to replace the front tyres, which seem to create a lot of road noise. I appreciate our roads are not in a good state but wondered if there is a brand which...
I have a Toyota RAV4 XTR 2.0L petrol, automatic, 57 plate with 20,000 miles. I need to replace the tyres. Whilst I am happy with the Yokohama Geolanders currently on the car, are there any better tyres...
I recently bought a 2001 1.4 Ford Focus. I was told the near side rear wheel bearing was shot. I've tried to get the hub off, but it seems to be welded on there. Any ideas?