Refine by channel:
Forum (6046)
Ask HJ (2085)
News (830)
productReview (91)
Article (55)
FAQs (10)
Reviews (6)
Good Garages (3)
Sort by: Relevance | Newest first | Oldest first
-
Peugeot 406 (1999 - 2004) - 03 1.8 Possible ABS fault 23 Apr 2009 (Forum)
Sometimes when I brake pretty lightly in my 53 plate 406 Rapier, the ABS seems to activate as if the road is slippy when it could be totally dry. I have read about the sensors in the hubs being dirty but is this right ?? -
Speed camera saves a life! 19 Jan 2009 (Forum)
Last night a huge tree was blown over onto the road, missing a motorist "by inches". She had just braked, as there is a speed camera there, and she wanted to bring her speed down to 60km/h! -
Ford C-MAX (2003 - 2010) - 05 Rear pad replacement. 9 Jan 2008 (Forum)
Replacing all pads on C-Max (05) ghia. Fronts I have no problem with. Please some info on the rears. Has electronic parking brake. Is this disabled at the caliper or just turn ignition on to release? And do I need a special tool to wind piston into caliper? -
Nuts and Bolts 5 Nov 2007 (Forum)
If your car has alloy wheels and a steel 'emergency wheel', DON'T USE THE ALLOY WHEEL'S BOLTS TO FIT THE EMERGENCY WHEEL. What usually happens is they are so long they go right through the hubs and interfere with the brakes. There shoud be a special set of bolts for the steel emergency wheel. The best thing to do with them is tape them onto the emergency wheel as a reminder. HJ -
MOT Failure? 6 Apr 2007 (Forum)
Changed the brake pads on the wife's 02 Fiesta a couple of days ago. While doing so, I noticed that both the driveshaft gaiters (correct name?) were worn and one was split. I'm aware for mechanical longevity they will need to be replaced. -
new Galaxy ............thoughts? 27 Oct 2006 (Forum)
Bought the new mk 3 galaxy last week, base model lx i.8 tdci engine. So far impressions have been all good, very peppy engine, sharp brakes and very slick gearbox. Inside room is also cavernous, have been a few less than favourable comments about its appearance..........................any thoughts anyone? -
Buying Used cars in Sweden 22 Jun 2006 (Forum)
I heard on the radio today that when swedish cars are three years old they have an MOT test which is so strict that it demands that the cars entire braking system is replaced.It was claimed that lots of cars are scrapped early in their life and replaced with a new one, has anyone ony knowledge of this ? sounds like a good place to buy a second hand car. -
renault scenic yes or no? 9 Jun 2006 (Forum)
at the moment she has a 1.2 clio which struggles on hills when half full and we dont want the same problem! Also any probs with trim ,engine ,brakes etc that you owners can warn of? Cheers -
CItroen Synergie Handbrake 2 Apr 2006 (Forum)
My handbrake is not working on my synergie. it pulls up and puts the brakes on but wont stay in position and does'nt make the clicking noise. Is the handbrake replacement a big job? Would it be best to let a garage to do it? Any comments on this car would be good as i am thinking of getting rid of it this year for something else, needs to be an MPV as we have 3 kids. -
passat tdi revs not returning to idle 14 Mar 2006 (Forum)
my 1996 passat 1.9 tdi (fly by wire) has a problem where slowing down for a corner , junction or roundabout the engine revs stays up and i have to brake hard to slow the car then after a little delay the revs drop back. the car runs fine otherwise and is regulary serviced. -
BMW 318se 8 Jan 2006 (Forum)
What needs to be done and what should I get him to change just to be on the safe side eg cambelt, brake discs etc. Any advise is most appreciated as I've booked it in for tomorrow. Thanks -
Praise for a Renault Scenic. 25 Nov 2005 (Forum)
Shattered a few illusions, Strong 1.9 diesel, smooth and quiet thing linked to a very nice 6 speed box, nice electronic hand-brake. Seemingly as well made, good radio but a blinking fustrating heated rear window - the timer interval is unreal. Yes, I could buy one if I was in the market. -
Ford Ka Stalling 16 Mar 2005 (Forum)
Hi there, R reg Ford Ka, keeps stalling under braking - even lightly. Starts again no problem on starter motor. Seems to idle a bit roughly as well, yet seems quite smooth when revved. Anyone got any ideas on what could be causing this please? My main idea is the idle speed control valve, if it has one of these? -
Corsa 2001, squeal when turning 2 Dec 2004 (Forum)
Just starting happening, when I turn right to go around a roundabout or turning right at a junction the nearside front wheel squeals, like a rubbing brake pad, it only happens as the steering load is going onto the wheel. Have I picked a piece of grit that only rubs when turning right. Any thoughts. Bert -
Proximity Detector 15 Oct 2004 (Forum)
Taking the Passat into the dealer today for a warranty item, when bing bong dashboard lights up with CHECK BRAKE PADS. What was going to be a free visit turned into £123 for changing the front pads. £45 pads plus one hour labour £60 pus VAT. Must be grateful that discs are still OK at 54K. -- I wasna fu but just had plenty. -
Polo 1.6CL (100BHP) Burning Smell 2 Apr 2004 (Forum)
Hi Guys, My Polo (P reg) has developed a slight burning smell when I'm in reverse. The car had a new clutch put in Jan 2003. Its going in to the garage on Wednesday for rear brake change, so I'll mention it to them then, but was hoping someone here might be able to suggest something. Cheers in advance Ben -
Are there any Mirafioris still running 16 Sep 2003 (Forum)
I received a phone call two months later asking if I was still the owner as it had been nicked and abandoned in Stafford. The brakes were awful. I had to pump them to get the thing to stop but it was a brilliant car to drive. -
Unused Corrado G60 8 Aug 2003 (Forum)
I'm due to start haggling for a Corrado G60 which has been unused for around 18 months. I want to factor in relpacing. Tyres Fluids Brake components (supercharger was changed 2 yrs ago for £800. Is there anything else I should allow for replacing when haggling? Also - following the demise of vw-corrado-club.co.uk is there another site for users of the corrado? -
rusted bleed valve nut! 1 Aug 2003 (Forum)
Just changed a brake hose on my mk2 golf. I've come to bleed the system but can't open the bleed valve as the nut is rusted. I've tried some penetrating fluid but it does not budge. The nut is begining to become rounded so that a spanner will soon have no grip on it. -
cleaning alloys 8 May 2003 (Forum)
Having recently acquired my first alloy-powered car, are there any tips, do's and don'ts when it comes to caring for alloys. I'm used to applying the magic sponge to car wheels and I'm sort of conscious that the brakes are rather more visible with alloys than with normal wheels. Would car wash soap suds be doing alloys the world of "bad" or good? Advice gratefully received. Splodgeface