Showing results in  Forum [Show all channels]

Sort by: Relevance | Newest first | Oldest first

• peugeot 306 hdi 2.0l diesel 1999(v) - will not start 28 Apr 2010 (Forum)
  The above items go back to the ECU onto terminals 80,52,50 respectively. I have checked for continuity and earth / direct shorts on the cabeling from the ECU connector to each engine component and all are o.k. I would be very grateful if anyone can give me advise on where to go next?
• Vauxhall Corsa B (1993 - 2000) - 99 1.2 not injecting fuel into cylinder 21 Nov 2009 (Forum)
  ive changed everything.injectors fuel filter all of it.can it be the ecu is telling it to do this?i brought it with the engine running like this,so changed it and now still doin it.but used same ecu as it has the immobilser in the key fob and wouldnt start with the engines ecu so put old one on.what can this be everyone ive asked dont no.had it pluged in down my local garage help please someone out there must no what there talking about
• Golf 1.6 16v Performance probs... 24 Jan 2003 (Forum)
  Curiously, the warmer the engine when the car is started, the worse the problem is but performance never deteriorates if the car was started from cold! It's as if the ECU makes some kind of decision on how to setup the engine when the car is first started. The car is an import so is now out of warranty but three ECU,s, two EGR valves and several other sensors later and nothing changed.
• citreon c3 1.4 8v petrol 2007. - citroen c3 ,2007 1.4 petrol .wont crank over. 28 Jul 2018 (Forum)
  hi,my, citreon c3 1.4 8v 2007 started flashing up silly errors on the dash ,it then after a few weeks went into limp mode and flashed low oil ,i took it to a garage he said wiring loom and ecu is faulty.i sent the ecu away and was told thats there nothing wrong with it.so i got a auto elect guy to repair the loom in the engine bay. the car started and rev up but the oil light was flashing. i went to it yesterday and it wont crank over ,the auto guy said it the ecu.would stop the engine turn over if the ecu was faulty.the battery and starter are ok.any advise please.many thanks ray.
• SEAT Ibiza III - Seat ibiza 1.2 tdi CFWA 31 Mar 2018 (Forum)
  The codes are not really important here as it was a short cicuit.  Anyway after searching for a whole day I found the issue right by the ecu just as I was about to take the ecu out to test.  It was on the main loom under the ecu and had rubbed on the metal bracket. Hopefully could save someone some time. Included pictures of the fault.
• Vauxhall Astra Twintop 1.9 150 Design - Spanner warning Light 23 Sep 2011 (Forum)
  Long story but I've been back and forth to Thorney Motorsport, they have carried out diagnostics, regenerated the PDF, changed a PDF sensor and updated the ECU. As far as they are concerned all seems to be working OK but I still have the spanner light on. The garage passed all their findings on to VX technical and the response was, 'It MAY be the ECU'.
• Nissan Terrano II (1993 - 2005) - 99 2.7 ECU light 30 Dec 2009 (Forum)
  He replaced the sensor again much better now but seem to be using much more diesel. . After a few days my ECU light came on and if i press my brake it go's off again then stays off for a week or two i have no loss of power when it comes on , I would be greatfull for any help cheers Derek
• Volkswagen Golf IV (1998 - 2004) - 99 1.9TDi turbo not working, could it be the ECU? 26 Feb 2009 (Forum)
  My local garage had a look and couldn't see anything 'straightforward' wrong that they could fix straight away. They said they would need to replace the whole thing (expensive). They did ask about the new ECU I had fitted two years ago at a VW dealership. They said to check that they put in the turbo one, as if they didn't then there wouldn't be a signal to tell the turbo to work. could this be right? I called VW and they said the model they put in (WO38 906012 L) was the right one.
• Vectra ECU Fault 22 Aug 2005 (Forum)
  The car was sometimes relunctant to start if on a slight incline but would eventually start. Recently the ECU light has come on and the engine has went into emergency / limp home mode. I toook it to an independent Vaux specialist, who ran tech 2 on it, but could find no real reason for the fault. He suggested replacing the crankshaft sensor which was done but this hasn't rectifired the error as when I go above 3K revs the light comes on and the limp home mode arrives!
• GM ECU Fault Codes-Life-Span? 12 Jun 2003 (Forum)
  I thought that all fault codes were lost when the battery is disconnected - in this case it appears that the error message was held in the ECU memory, even without battery power, until a correct signal was received from the sensor. Can anyone clarify this?
• Nissan FB 15 - ECM pinout 16 Dec 2018 (Forum)
  Dear friends. Any body has pinout details of nissan Fb15 car ecu. ECM is A7(A56-K47 B35). Specially i need to know pinout details of below mentioned ECU pin numbers 26  (white/red ), 27 (light blue), 40  (blue/white), 42 (black/yellow), 64 (green/black), 65 (gray/blue).
• Ford Mondeo 13 Reg - No key to ECU connection 3 Mar 2017 (Forum)
  My work colleagues Mondeo left him stranded and the car was recovered to the Main dealer. The diagnosis is an new Abs unit at £2600 and if this does not...
• Honda Jazz 2008 EX - Changing battery 25 Apr 2016 (Forum)
    I have rung a couple of places for battery prices and some tell me that I will need to set up a 'trickle charge' to the leads as I change the battery as it will mess with the ECU, radio and clock settings - the clock and the radio I am fine with the ECU ???, and others tell me that it is a simple "on and off" swap. Could anyone set me straight with this please?
• VW Golf TDi Mk4 - Convenience unit 30 Apr 2013 (Forum)
  I have been told that the "convenience unit" has blown , i believe that its attatched to the vehicle's ecu. Does it just plug in, do i have to have the ECU reprogrammed after it's been replaced? Do i need to remove all of the dashboard in order to get to it?   Many thanks
• Vauxhall Vectra B facelift (1999 - 2002) - 01 1.8 ecu fault code 1612&1613 24 Jan 2010 (Forum)
  Hi I got emmissions warnng light on & read the codes as 1612 & 1613. I think those codes are for immobolizer & I can't understand why I have the emmissions...
• Mitsubishi Carisma (1995 - 2004) - 98 1.8 changing of MITSUBISHI ECU MD340897 29 Nov 2009 (Forum)
  Ineed to change this part in my old mitsubishi i was hoping that it would be a straight removal and replace, would anyone know if i need to reset the computer...
• Rover 600 td Ecu faults 21 May 2005 (Forum)
  Car runs fine for 12 miles, then when idling the yellow ECM light comes on and engine tries to fail, but then picks up again. This is accompnied by lumpt...
• Vauxhall Monterey ABS Fault Codes 29 Sep 2004 (Forum)
  Hello Folks, I suspect that it's a "yes", but does the ABS ECU store the codes? I have an intermittant sensor fault. My Vx franchise thought that the fault might need to be present when the ECU is read. Does anyone know of a gadget that reads them? I suspect that it's "Isuzu Only".
• Peugeot 406 (1999 - 2004) - 03 2.0 ECU light comes on when slowing down 16 Dec 2008 (Forum)
  can anyone tell me why when i set off everything is ok ... as soon as i take my foot off the throttle to slow dow the engine management jumps in .. if...
• Due to collect Golf GTi DSG Monday 16 Jun 2005 (Forum)
  The Dealership were initially unable to diagnose the problem but after consulting VW have ordered an new Gearbox ECU. The ECU has been ordered but I have been given no indication on the timescale for its arrival. I'm very dissapointed with the situation.