Omega 2.0L cam gasket replace help - happyvaux
Hello all, [ 2.0L 16v ecotec- auto 1994 ]

found oil in my spark plug holes the other day, car was running a little sluggish. I believe it's the cam cover gasket gone, so I'm about to replace it. I've got the gasket, sealant rings for the bolt-holes & blue sealant.

Can anyone advise me where exactly the sealant goes please? A link to a known diagram would be brill.
Obviously I've done some searching, but can't really find a lot.

Hoping to do it tomorrow, if weather stays ok.

{{ Also, any advice on the best way to clean out the crankcase breather. Seems to be bolted on behind the exhaust manifold, so I don't think I can remove it. I think this maybe was why the gasket went }}

Many thanks,

Pete
Omega 2.0L cam gasket replace help - Dynamic Dave
Can anyone advise me where exactly the sealant goes please?
A link to a known diagram would be brill.


No diagram, but a pretty good write up.

www.vauxhallownersnetwork.co.uk/showthread.php?t=6...0
Omega 2.0L cam gasket replace help - happyvaux
Thanks for that,

managed to find a few posts too. I'd been searching via the very top search bar ' site search ' , instead of forum search.


Pete