Corsa B 2000 - How to enter a radio code when there's no display

Honest John Back Room » Technical matters
View Threaded
Tue 18 Sep 2012 23:44
Corsa B 2000 - How to enter a radio code when there's no display - jikky

Recently purchased a Corsa B Envoy (2000) with no radio.

Radio purchased now.

As it's an older type radio there is no digital display (like on the Corsa C, that shows "SAFE")

How do I know when the radio is actually working and ready to accept the code?

There doesn't seem to be any display on it to show when it is is operating.

Any advice would be helpful..

Thank you

Reply | Report as offensive | Link
Wed 19 Sep 2012 01:10
Corsa B 2000 - How to enter a radio code when there's no display - Avant

Moved to Technical.

Reply | Report as offensive | Link
Wed 19 Sep 2012 08:37
Corsa B 2000 - How to enter a radio code when there's no display - elekie&a/c doctor

The display for the radio is on top of the dash,above heater vents.With radio not in use,it will display time and outside temperature.hth

Reply | Report as offensive | Link
Wed 19 Sep 2012 10:14
Corsa B 2000 - How to enter a radio code when there's no display - jikky

Good one ! Yes, of course .. Like the Corsa C ? Will look into that now..

Appreciate your help ..Thank you

Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide