Hi!
I bought an rear wing plastic moulding to replace the old one missing.
The problem is that it fits on the 2 small clips that fixes it to the upper part of the wing, but there are no fixing clips on the lower part, except from some kind insulation that may be sticky, but it's not.
How should I fit it?
Thanks,
Ove
|
I don't have any specific knowledge of your problem but I had a problem with a plastic moulding on my Fiat Panda Cross. Now, I could have gone back and forth to the dealer but the prospect of repeated 30 mile round trips led to me to find an alternative solution.
I used double-sided black butyl adhesive tape, which is available on Ebay. Thoroughly waterproof as it is used to repair leaks in garden pond liners.
|
|