BMW swirl flap failure

Have you had many complaints about swirl flap failure which usually results in catastrophic engine damage? BMW of course does not admit there is a problem, but a visit to Google>BMW swirl flaps tells otherwise.

Owners who don't want to drive with this potential "timebomb" are being advised by independent engineers to have the flaps removed from the inlet manifold and to fit blanking plates,with no significant increase in emissions. What are your thoughts on this?

Asked on 5 August 2012 by glandyfi

Answered by Honest John

Yes. It was a problem with 2003 - 2005 3.0 litre and 2.0 litre diesels. Not so much of a problem since. On older cars, yes, have them removed. The engines will be less efficient, but won't then self-destruct.

Tags: technical issues swirl flaps

Similar questions

Flap jacks

Your Telegraph column of 1st May prompted me to e-mail BMW to question whether the swirls flaps on my 2003 BMW530D engine was a known weakness as reported by you. BMW admits it has modified the inlet manifold...

Why is my car having issues since I used Redex petrol cleaner?

When I first start my 2001 Ford Mondeo in the morning it is great, however when the engine warms up I start having problems. It doesn't matter what gear I'm in, whilst trying to accelerate it jumps forward....

Is my Zafira a write-off?

I've been told the following about my Zafira by a vaxhuall garage: Fault on inlet manifold and noisy on initial start up –suspect internal swirl flaps have collapsed and possible engine damage Vehicle...

Related models