fan not working?
# Remove wire from temperature sensor: switch on ignition. Fan should come on: this proving fan + circuits +relay+ fuses are ok..
(you need a wiring diagram to know which connector to remove).
# If fan does not come on, you can test it with a 12Volt supply direct from battery.
If fan comes on, fuse , wiring or relay.
Best to start by checking fuse: you will need to consult handbook to identify the correct one.
If you know nothing of car electrics..do NOT try # items...you may destroy the ECU.
No handbook or wiring diagram? Give up.
Edited by madf on 13/08/2010 at 15:18
|