Our 1.2 polo SE has spent most of it's life in the garage.
Recently it has 3 coils replaced one after the other. Now the engine warning light has come on again. I have used a fault code reader these codes have come up has any one got an idea as to what it might be;
16514 O2 Sensor Circ.,Bank1-Sensor1 Malfunction
16556 Fuel Trim,Bank1 System too Rich
16785 Exhaust Gas Recirc.Flow Insufficient Detected
17811 EGR Flow Deviation
17925 Main Relay Circ. Electrical Malfunction
I've had two suggestions from mechanically minded mates they reckon it's either my "Lambda Sensor" or the "Throttle Body".
Any ideas or suggestions gents
Edited by Dynamic Dave on 12/09/2009 at 15:47
|