02 1.9 Where are Axle stand points at the front? - 1964johnr
Can anyone tell me where to place Axle Stands at the front of the Passat. I need to get underneath and check for a leaking pipe, but I want to be safe. Any help would be appreciated.

Edited by Dynamic Dave on 18/03/2009 at 12:45

02 1.9 Where are Axle stand points at the front? - Glaikit Wee Scunner {P}
Front end of the sills. A little indent indicates the position. See the owners handbook. You may need to pad the stands to minimise damage. ATS managed tyre changes OK and I think they had rubber blocks on their trolley jacks.
02 1.9 Where are Axle stand points at the front? - Peter D
I prefer the chunky blister with the alignment hole in it behind and inbound of the rear arm bushes. I have a block of dense marine ply with a recess in it to fit the buildout mound. At the rear I use either the main beam mounts if I want the beam down or the surface under the end of the beam tubes near where the shockers are attached. Regards Peter
02 1.9 Where are Axle stand points at the front? - 1964johnr
Thanks for the info, will look for the indent on the sills.
 

Value my car