disabling ABS

Honest John Back Room » Technical matters
View Threaded
Fri 16 Aug 2002 11:10
disabling ABS - borasport20
Hi

I'm getting an almost permanent judder from the brakes on my bora sport. How can i temporarily disconnect the ABS to see if that's the problem ?

(the handbook suggests there are 4 fuses on the battery of which one is ABS motor realy and one is ABS main realy, but doesn't help you identify which is which (and there are only 4 fuses on my battery)
and there's also another fuse labelled ABS on the main (internal) fuse box

anybody know ?

ta


when you've got tired of driving ...
www.mikes-walks.co.uk
Reply | Report as offensive | Link
Fri 16 Aug 2002 16:48
disabling ABS - Cyd
You should find a large wiring connector on the side of the ABS block. This is a special waterproof connector with about 20 ways. Disconnect this and your ABS will be disabled. Protect the connector from any water & dirt with a plastic bag. Tape over the aperture on the block.
Reply | Report as offensive | Link