1995 414 Replacement of seat belt anchor - cipollina
My father in law's driver side seat belt will no longer locate correctly into the seat belt anchor and he has aked me to urgently find a replacement. There are two part numbers on the faulty anchor - EVB102060LNF and 03R799895 but I am struggling to find any parts corresponding to these numbers. Is it absolutely critical that the correct anchor is fitted or do most anchors fit most seat belts?

Edited by Pugugly on 26/07/2008 at 19:00

1995 414 Replacement of seat belt anchor - caine
Seat belts are not made in house,they are bought in,so your numbers are the belt manufacturers.Rover will list them under there own parts system.Try the breakers.As long as the car was'nt crashed damaged I'd be confident they were safe/secure.Or contact "britax"
1995 414 Replacement of seat belt anchor - cipollina
So - will any anchor fit any belt ? or are there different sizes and models?
1995 414 Replacement of seat belt anchor - caine
Any anchor from the main dealer for this model/year will fit.As for breaker's,the same should apply.If your concern is failure during stress,then buy both parts.I'd recomend the dealer for absolute peace of mind if you have any doubts.
1995 414 Replacement of seat belt anchor - Victorbox
Are there still Rover main dealers?
1995 414 Replacement of seat belt anchor - *Gongfarmer*
You could try Honda as the 5- door Civic was almost the same. Prices are realistic for older cars - a Rover 400 style door handle cost me £25, breaker wanted £12 for a ten year old one !