I would go for a linkage problem here.This is a very common fault on this model.The plastic pivits wear out and cause a floppy gearshift.Part costs around £45.hth
|
|
the linkage is a known weak point in this model, you top up the gearbox and diff unit by removing the breather plug (17 mm in size black plastic cap on it on top of gearbox where the selector turret is bolted) and the level plug is beside the nearside driveshaft as it comes out of the diff 13mm head taper fit into diff with a magnet on it dont over tighten it when refitting
|
Wow, excellent responses guys, just what I was hoping for.
I think bearing in mind my ability, that'll hand this over to a friendly mechanic.
Thanks again!
|
|
|