Peugeot 306 (1993 - 2001) - 1.9TD, 1996. The Correct tyre pressures with alloy | Technical matters | Back Room Forum

Sat 15 Mar 2008 15:42

1.9TD, 1996. The Correct tyre pressures with alloy - kristianc4

I have lost my manual so i was wondering if any can tell me the correct tyre pressures for the front and back in PSI. thanks

and another question i have 17inch alloys the spec is 205/40/zr17 84w
would it be the same tyre pressure or would it be different? thanks

Reply | Report as offensive | Link

Sat 15 Mar 2008 21:52

1.9TD, 1996. The Correct tyre pressures with alloy - Dynamic Dave

See if it's listed in the following link anywhere:-

www.dunloptyres.co.uk/fandp/pressureGuide

Reply | Report as offensive | Link

Sat 15 Mar 2008 23:11

1.9TD, 1996. The Correct tyre pressures with alloy - Screwloose

With such a non-standard wheel/tyre set-up; you'll have to find your own ideal balance.

The standard 185/65-14 is 2.3 bar [c.34lbf/sq/in] all round.

Reply | Report as offensive | Link

Related questions

Does the BMW Active Tourer have a tyre pressure monitoring system?

Does he new BMW Active Tourer M Sport has tyre pressure monitoring fitted as standard?

Should I be swapping the wheels of my Volvo back to front to even out wear?

At a recent service for my Volvo XC60 I asked for the wheels to be swapped back to front to even out wear - as suggested in the Volvo handbook. This was not done as I was initially told that it was not...

Are aftermarket tyre pressure monitoring systems safe and how much do they cost?

Is a tyre pressure warning light an MoT failure even if the pressures are correct?

Is a tyre pressure light showing an MoT failure even if the pressures are correct? Can I just disconnect the light?

Ask Honest John

Sell Your Car

Real MPG

Fuel Calculator