Honda Prelude (1992 - 1996) - Running a cable from engine bay to inside cabin

Honest John Back Room » Technical matters
View Threaded
Tue 14 Aug 2007 19:06
Running a cable from engine bay to inside cabin - allan doc
I am trying to run a cable from the engine bay to inside the car. I dont want to drill any holes and can't see and rubber grommets to run the cable through. Anyone any ideas? Its a 1992 Honda Prelude.
Reply | Report as offensive | Link
Tue 14 Aug 2007 19:23
Running a cable from engine bay to inside cabin - milkyjoe
just the obvious question but here we go.....whats the cable for?
Reply | Report as offensive | Link
Tue 14 Aug 2007 19:37
Running a cable from engine bay to inside cabin - allan doc
a laser detector
Reply | Report as offensive | Link
Tue 14 Aug 2007 21:06
Running a cable from engine bay to inside cabin - milkyjoe
blimey
Reply | Report as offensive | Link
Wed 15 Aug 2007 09:20
Running a cable from engine bay to inside cabin - Cliff Pope
Well, if there aren't any existing holes, and you don't want to make a new one, you're stuck!
It will have to be wireless transmission, or mount the display on the outside of the windscreen, or jam the wires in the door seal.
Reply | Report as offensive | Link
Wed 15 Aug 2007 09:47
Running a cable from engine bay to inside cabin - Collos25
What is wrong with drilling a hole and fitting a grommit or is it a lease car,I have never in my life seen a car that does not have cables or rods going from the inside of the cabin to the outside, look closer.
Reply | Report as offensive | Link
Wed 15 Aug 2007 10:04
Running a cable from engine bay to inside cabin - Altea Ego
Dont waste your time. By the time the laser detector has alerted you, you are already nicked. sell it back on e-bay. The only ones that work are the laser blinders.
------------------------------
< Ex RF, Ex TVM >
Reply | Report as offensive | Link