Hi
On my bike I have a question about maintance.
The foot gear change lever must have a certain amount of play, and too much play can eventually break the engine.
How should the freeplay be checked? Should it be in gear, out of gear, and what amount of freeplay is recommended?
The bike is a CG125.
Thanks
Greg
|
|
As far as I'm aware there is nothing to check, other than the lever being tight on the spindle, or the ridges will wear away and you'll have no gears. Check the pinch bolt at the end of the lever is tight.
|
|
Correct...the level of free play is not adjustable....nothing to check or adjust.
|
|
Head over to www.visordown.com it's a bike forum!
|
Are you sure you're not misreading something the clutch gets adjusted and not the gearshift??
|
|
|