focus dials - jpu
I have an X reg focus. Just lately the dials will flicker the engine managment light will come on and the dashboard lights go blank so I can't see the milage. I stop the car, turn off engine and wait a couple of minutes. Switch engine on and everything is fine for 30 or 40 miles then it does it again. Been to 4 different garages who have said that the car is fine we cannot find any fault. Can anyone help?
focus dials - SjB {P}
See www.honestjohn.co.uk/forum/post/index.htm?t=36118&...f

There is also a simple way of putting the dials in to a "test" mode by pressing buttons in specific sequence or somesuch, but I didn't find it from a fast search of the Back Room. Someone else will be along soon to provide the info, I'm sure!
focus dials - SjB {P}
Seems to be "Hold the trip reset button in and turn on the engine. Keep pressing to cycle through the many different options."
focus dials - Dynamic Dave
There is also a simple way of putting the dials in to a "test" mode


www.honestjohn.co.uk/forum/post/index.htm?t=37471&...e
focus dials - jpu
Came up with a code of 9318. When I asked my local garage what this code means they would not say. Can anyone tell me?
focus dials - pug3
Code 9318 is battery voltage low.

See www.focushacks.com/index.php?modid=37 for list of codes
focus dials - jpu
Thanks. Do you also know what D262 means.
focus dials - Adam {P}
"Missing SCP Message"

Don't ask me what an SCP is or why it would have a message.
focus dials - Pugugly {P}
www.3.8mustang.com/forum/showthread.php?t=55313

Same fault on a Ford Mustang, same meaasage and it's all explained.