Hi,
My 1999 saxo has a starting problems, it always starts first time but the majority og the time it takes a good few seconds of turning the key before the engine actually ticks over.
I have replaced all the spark plugs, someone at my work mentioned adjusting the tappets?, anyone got any ideas if this will work or any other ideas?
Thanks.
|
Measure the resistance of each HT lead they should be about 1500 ohms/330mm. The pin up the centre of the carbon dopped core is prone to corrosion and I often find one or two leads at 50,000 ohms either repair or replace. the set adn the King lead. Regards Peter
|
|