Mazda 2 - EAC code | Technical matters | Back Room Forum

Sun 16 Feb 2014 09:30

Mazda 2 - EAC code - louis14

Already 3 times I got the EAC code on my dashboard.At that moment my power level doesn't go above 10mph. When I stop the engine and I restart it the problem is fixed.

My dealer did a DTC(diagnostic?) reading of the computer in my engine but he could not recover the code. So he cannot find the cause of the problem.

He has done a software update of the PCM (power module).

What must I do?Will the update help the problem?

Reply | Report as offensive | Link

Sun 16 Feb 2014 11:30

Mazda 2 - EAC code - elekie&a/c doctor

This has same engine and electronic throttle system as fitted to Fiesta models.I would get all the connector blocks to the engine checked.Also a low or poor condition battery can give this problem .hth

Reply | Report as offensive | Link

Related questions

I'm getting a 'risk of filter clogging' warning - what do you advise I do?

I have a 2011 Peugeot Partner which has just started displaying a 'risk of filter clogging' warning. I took it for a run on the dual carriageway, but it hasn't made any difference.

My scooter is ticking over quite erratically - what's the issue?

I have Piaggio Medley 125 and tick over is very erratic. I've only done 1500 miles. Do you know what the problem is?

The injector in my Mazda 3 has failed - is this due to using supermarket fuel?

Whilst driving along, my 2012 Mazda 3 1.6d (39,000 miles) suddenly juddered and went into limp mode. I cautiously negotiated to the hard shoulder with the dashboard lit up with maintenance, ABS, and warning...

Should Volkswagen replace my my Golf's EGR for free?

I own a 2011 Volkswagen Golf Mk6 1.6 TDI, bought in in December 2015 from a local independent Volkswagen dealer. My mechanic noticed a water leak after I mentioned the coolant light coming on a couple...

Ask Honest John

Sell Your Car

Real MPG

Fuel Calculator