Fiesta 1.4 tdci 2007 - code p0191

Honest John Back Room » Technical matters
View Threaded
Sun 21 Feb 2016 17:41
Fiesta 1.4 tdci 2007 - code p0191 - Budgiestongue

Hi all,

ive just put a new engine in my fiesta 1.4 tdci and things i replaced from my old onto new engine where fuel pressure sensor as other one had broken connector, throttle thing ontop of engine, water pump, everything else came with engine. Once engine was in and i was happy with everything i pumped hand pump to bleed fuel, turned key and it started 1st time, so next day i started it and got orange cog flashing but started 1st time again, the problem is once i start it on the morning it will run as long as i want but once turned off it wont start again until next day? Ive attached photo of live data and code p0191 fuel rail pressure. Any ideas what could be the problem? Do i need a new sensir or does it need bleeding? Cheers.
www.fordownersclub.com/forums/uploads/monthly_2016...g
www.fordownersclub.com/forums/uploads/monthly_2016...g

They are links to live data and fault code.
Reply | Report as offensive | Link
Sun 21 Feb 2016 19:01
Fiesta 1.4 tdci 2007 - code p0191 - Budgiestongue
Anyone? I dont want to give it to the s******s just yet.
Reply | Report as offensive | Link
Sun 21 Feb 2016 19:29
Fiesta 1.4 tdci 2007 - code p0191 - elekie&a/c doctor

With the limited info supplied,I would say the fuel pressure is too low.As to what is causing this will require further investigation and analysis.

Reply | Report as offensive | Link
Sun 21 Feb 2016 20:51
Fiesta 1.4 tdci 2007 - code p0191 - Budgiestongue
It did start on a morning but wouldnt start after that wether warm or cold until next morning but now wont start as pressure too low only 96 bar instead of 120 so the ecu wont let it start, ive pumped hand pump loads and pressure doesnt rise.
Reply | Report as offensive | Link
Sat 27 Feb 2016 16:55
Fiesta 1.4 tdci 2007 - code p0191 - Budgiestongue
Anyone?
Reply | Report as offensive | Link
Sat 27 Feb 2016 17:14
Fiesta 1.4 tdci 2007 - code p0191 - hardway

Kind of answered your own question,

it has low rail pressure,

and the hand pump is just for brining the fuel up from the tank.

And has little to do with FRP once the fuel is up.

So investigate the low FRP.

You still have 4 injectors off the old engine yes?

Swap them onto the replacement engine.

Might be a faulty injector on the new engine.

Whatever you try the FRP has to be higher.

Reply | Report as offensive | Link
Sun 28 Feb 2016 18:22
Fiesta 1.4 tdci 2007 - code p0191 - 3uga

Frp apeard on my ff2 1.6tdci when I had a chloged fuel filter.

Leave the engine for an hour to run on idle so the new pum can be learned by the ecu and that way the CR can self bleed the air in it

Reply | Report as offensive | Link
Mon 21 Mar 2016 19:18
Fiesta 1.4 tdci 2007 - code p0191 - Budgiestongue
Ok this is strange i still have p0191 code and changed the sensor for my old one off old engine, car wont start, i unplugged the sensor to test live and earth, 5 volts across so seems ok but this is the strange thing i turned key and it started without sensor plug in, plugged sensor in and it wont start? Starts everytime with sensor plug not on? Any ideas im loosing the will.
Reply | Report as offensive | Link

From which small car to buy at which price point to the best UK-built cars, our Top 10s have the lot. Click now for your shortlist.

Unsure of what to buy? Our Top 10s are here to help you....