PEUGEOT 206 - CANT CLEAR DTC FAULT CODES AFTER CHANGING INJECTOR

Honest John Back Room » Technical matters
View Threaded
Sun 10 Jan 2016 16:49
PEUGEOT 206 - CANT CLEAR DTC FAULT CODES AFTER CHANGING INJECTOR - dazlanditd5

CAR WAS RUNNING ON 3 SO I PLUGGED IN CAME UP INJECTOR 3 CIRCUIT HIGH RESITANCE/SO FIXED IT WITH A NEW INJECTOR AS I DID A TEST ON THE RESISTANCE ON THE INJECTOR AND IT WASNT RIGHT SO CHANGED IT ,AND NOW IT RUNS FANTASTIC BUT I CANT CLEAR THE FAULT CODES ,AS IT SAYS THEY ARE PERMINANT ,ANYONE HAD THIS FAULT

ALSO SIMILAR SCENARO ON MY DADS VECTRA AT THE MIN

Reply | Report as offensive | Link
Sun 10 Jan 2016 18:45
PEUGEOT 206 - CANT CLEAR DTC FAULT CODES AFTER CHANGING INJECTOR - hardway

Injector #3 high restance circuit was most likely not the injector but the harness.

Check that.

Reply | Report as offensive | Link
Sun 10 Jan 2016 19:25
PEUGEOT 206 - CANT CLEAR DTC FAULT CODES AFTER CHANGING INJECTOR - elekie&a/c doctor

Injector faults on these is a very common problem.However you need to be careful with these as the injectors are numbered from the gearbox end.Did you check all the injectors for resistance?there could be more than one in trouble.If i recall,injector resistance should be 12-18 ohms.

Reply | Report as offensive | Link

From which small car to buy at which price point to the best UK-built cars, our Top 10s have the lot. Click now for your shortlist.

Unsure of what to buy? Our Top 10s are here to help you....