Clutching at straws
I have just had the clutch replaced in my Peugeot 206, 1.6 XS, but the problem is that now the new clutch has been fitted it now jumps when trying to move it. The clutch jumps and then the car stalls.
Could you help me and tell me what u think the problem could be? And if the problem is with the new clutch that has been put in, the gearbox or the clutch cable?
Could you help me and tell me what u think the problem could be? And if the problem is with the new clutch that has been put in, the gearbox or the clutch cable?
Asked on 9 May 2011 by Emma L Cooper
Answered by
Alan Ross
Who actually replaced the clutch, as it sounds as though they have not ensured it is working correctly. have you gone back to them and asked them to check it out.
Intial thoughts are the clutch cable.
Intial thoughts are the clutch cable.
Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.
The Good Garage GuideSimilar questions
When my car starts from cold for the first five minutess of driving when I let the clutch up to move off there is a short "whooo" type noise, is this the clutch plate or release bearing, or simply change...
The clutch has failed on my daughter's 53 reg car, two months after the Peugeot dealership (who sold the car to her 15 months ago) carried out a service and MOT. Is it reasonable to expect them to have...
My gearstick is struggling to get into gear, particularly first and reverse. What would be the likely cause and remedy? How much is likely to cost to sort out?
Related models
.jpg?width=115&height=75&rmode=crop)
Elsewhere on 
.jpg)
