Peugeot 206 - Issue with 206 2.0 hdi - chrisooo
Hi first time post so hope it's in the correct place.

Here It goes I have a 206 year 2000 2.0 hdi has been running fine until last week when driving along the engine cut out and I heard a scraping noise rang green flag they come got fault codes
P0903 clutch actuator circuit high
P0335 crankshaft position sensor
So changed the crankshaft position sensor battery was now flat rang green flag they come out codes this time are:
P1521 clutch sensor
P0340 cam/crank sync
P1517 coded anti start opp
P1108 fan high speed circuit
Not had the car 2months just want some advice before I start throwing money (I don't have much of at the min being just before crimbo) at it.
Thanks in advance
Peugeot 206 - Issue with 206 2.0 hdi - Peter.N.

cam/crank sync could be a clue, I suppose the timing belt hasn't slipped a tooth? Coded anti start opp I don't have a clue about. You really need a diesel specialist, they are cheaper than a garage and usually know what they are doing. If you can find someone with a Lexia that should code read it properly. If you join the 'french car forum' there might be someone near you that's got one.

http://www.frenchcarforum.co.uk/forum/viewforum.php?f=4

Edited by Peter.N. on 24/11/2012 at 15:56

Peugeot 206 - Issue with 206 2.0 hdi - chrisooo
Cheers for the quick reply the timing belt is tight I have posted on the peugeot forum now so just gona see what I get from there thanks once again