citreon xantia hdi, 2000 - citreon xantia suspension help - track

Im currently running about in a 2000 Citreon Xantia HDI, it has the standard suspension set up as its only the Forte model, not hydractive. The suspension all works in the sense it rises and falls, isnt harsh, doesnt leak etc and the spheres were changed not long before I got the car. The fault is the front valve on the bottom crossmember sits in a cradle. This cradle appears to be seized solid. Ive tried stripping it and cleaning etc but its too far gone. Does anyone know the part number for this or where I could possibly buy one? Ive disconnected the linkage bar for now and set the height to normal using the anti roll bar correcter bit.Thanks

citreon xantia hdi, 2000 - citreon xantia suspension help - Peter.N.

Are you saying that the front height corrector is not working? If you can get the correct height with the manual lever it must be. There is very little movement in the linkage, hardly perceptible in fact, could it be that the clamp around the anti roll bar needs adjusting?