Peugeot 307 2.0 HDI - heater pipe seals

Honest John Back Room » Technical matters
View Threaded
Sat 5 Mar 2011 09:37
Peugeot 307 2.0 HDI - heater pipe seals - T120

I've just changed the heater matrix on a 307 and there's a leak where the pipes attach, I did grease the 'O' rings before refitting but it looks like they need to be changed. Peugeot only sell them as part of a pipe kit -£60 +VAT! Does anyone know what size they are please.

Reply | Report as offensive | Link
Sat 5 Mar 2011 09:56
Peugeot 307 2.0 HDI - heater pipe seals - Peter D

You have the old matrix so measure the diameter of the pipe and check with your local motor factors. Regards Peter

Reply | Report as offensive | Link
Sat 5 Mar 2011 10:26
Peugeot 307 2.0 HDI - heater pipe seals - T120

Thanks for the suggestion but that only gives me the I/D of the seal, I'm aware that I can strip down again & measure the old seal but I was trying to avoid that.

Reply | Report as offensive | Link
Sat 5 Mar 2011 10:42
Peugeot 307 2.0 HDI - heater pipe seals - Peter D

I know that but the motor factors may be able to offer you at least a couple of OD's. I doubt the 'O' ring is a special to type size. Regards Peter

Reply | Report as offensive | Link