Can anyone give me a step-by-step guide to removal of the screenwash resevoir which is located in front of the drivers side wheel arch (I think I can work out how to clean it out myself once I get it to the kitchen sink). Is it necessary to remove the bumper assembly in the 2006 model variant or is there an easier way to access the resevoir?
I cleared a blocked screenwash by blowing air back through the pipework. If you can disconnect the tubing at a joint and get hold of something to blast some air back down the system you may clear the muck from the filter. Then stick a hosepipe into the washer bottle and give that a flush out.
