Hello All,

Hope someone can point me in right direction.

I have been getting water (yes water, not condensate, not any other substance) in the drivers footwell (only).

Have traced leak as far as the steering column bulkhead shroud "area", but still don't precisely know where the water is coming from.
Only appears after a rain fall, and I aint perfected the technique of driving with my head between my ankles and head rotated by 180 degrees.

Now I have silicone sealed the shroud all round between bulkhead and shroud (absolute sod).

I also noticed "rust" on the inner pin of the coupling (strange), so I've greased in between, in case external
rain water is being driven through (which I feel might be a red herring).

Anyway tried to remove scuttle panel to peek in between bulkhead, wipers and screws etc removed succesfully, but:
there is two little "ears" where your bonnet hinges are that need to come off first, they are attached to each of the wings.

I can see a pin that locks them to the wing, but cannot figure out how to remove.

Any help much appreciated.