Transit 95 2.5 clutch cable auto adjust to manual - mex
hi
i have a transit 2500 n/a diesel with the ratchet pawl adjuster on the clutch pedal
the pedal keeps going to the floor then ratchets back up then later it will go to the floor again, the teeth on the ratchet are ok but i heard that i can put the manual cable on and get rid of the ratchet system
any ideas which year the cable would be from and would i need the pedal as well and is it an easy job to swap
thanks in advance

Edited by Dynamic Dave on 29/06/2009 at 22:14