HI how do I change electric indow winder , have removed the door trim , and unbolted the metal panel holding the motor and winder but can not get it out, ie. do I have to have the window fully up ? how do I free the glass from the winder as I can not see behind the metal panal, I can get a new winder as the motor is ok HELP PLEASE .
|
On a 98 (previous model) the window is held by 2 small bolts accessed by 2 holes at the bottom of the door panel, the window needs to be fully down. But, I had a problem getting window down and drilled a hole in inner door panel to enable access. However,memory a bit rusty and don't forget this was older model.
|
A link to the service manual.
www.mediafire.com/?dyzhbsdg9dc
If you are still having problems, try npoc.co.uk
Very friendly and helpful. Lots of info on Primera IV (P12) common problems.
|
Hi yes got the info required Thanks a lot, now have to get new regulator [winder] and as I live in Spain will have to get one shiped as silly prices for spare parts hear THANKS again Ian.
|
Hi i live in Spain and need a window regulator [winder] for the drivers side ie lefthand drive , so need suplyers that will post for me, as parts cost arm and two legs over hear, so life in the sun not all wine and roses, but I will just have grin and bear it HELP Please Ian.
|
Have a google/ebay search for Primera P12 window regulator.
|
|