Dont go to the main Jeep dealers , they will rip you like £500+ for parts that are not needed. Use a local garage if must.

The slave is the only part that is needed here, its a common fault. Here are the parts you need..

slave seal -( camberley auto factors) No S7665. £6 or simply remove the seal , take it to the bearing /seal company local to you. match it & replace.

or call> jeepchryslerparts.co.uk Part is £60+ £3 p/p for the complete slave cylinder new !!

when fitting , replace the cylinder & bleed the system by lifting the slave above the engine, thru the bay, Then bleed as you do a braking system, by pumping the foot pedal. Then lower the cylinder thru the engine bay & simply bolt into place.

Happy days :)

.co.uke

j

JeepChryslerParts.co.uk

Edited by jeepguy on 13/06/2011 at 13:29