BMW Fault

Honest John Back Room » Technical matters
View Threaded
Mon 30 Apr 2007 15:16
BMW Fault - ronnie_rev
I have a bmw 316I 1995. When stationary with the engine running , if you press the clutch down there is a loud wyning sound. Is this the thrust bearing. The clutch does not slip and it drives like normal. Just this loud noise, oh and you can feel a slight shudder in the clutch pedal itself. If it is the thrust bearing is it an easy job to fix. What happens if it goes completly. will i just loose drive or will the back wheels lock up. Cheers
Reply | Report as offensive | Link
Mon 30 Apr 2007 15:29
BMW FAULT - Number_Cruncher
When does the whining noise start?

As soon as there's some force on the pedal even if you haven't pushed it far -> it's the release bearing

As the pedal is pushed beyond where the clutch "bites" -> it's the spigot bearing

To do either is a gearbox out job - probably best to fit a 3 piece clutch kit at the same time. You may have a little time to plan how and where you do this job at your convenience.

Number_Cruncher
Reply | Report as offensive | Link
Mon 30 Apr 2007 15:33
BMW FAULT - ronnie_rev
Cheers mate. The noise starts as soon as there is any pressure on the pedal and gets worse the further you push it down.
Reply | Report as offensive | Link

10 warranty myths exposed

Here’s how to sort the fact from the fiction when it comes to car warranties.

Cheap Car Warranties

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide