Citroen picasso ABS sensor ring

Honest John Back Room » Technical matters
View Threaded
Mon 26 Jun 2006 21:27
Citroen picasso ABS sensor ring - canifixit
The sensor ring on the front RH drive shaft has broken. Is it possible to obtain a replacement for this or do I have to replace the complete CV joint or Driveshaft which is in perfectly good condition?

I tried glueing the ring back in position with araldite, this worked for a short while but the ABS malfunctionwarning has returned. I assume the glue has not held.


Reply | Report as offensive | Link
Mon 26 Jun 2006 21:30
Citroen picasso ABS sensor ring - Dynamic Dave
I assume the glue has not held.


Probably. Why not try something like chemical metal, or try and source a replacement CV joint from a breakers?
Reply | Report as offensive | Link
Mon 26 Jun 2006 22:49
Citroen picasso ABS sensor ring - Bromptonaut
On the (mechanically similar) Xantia the ABS ring is part of the driveshaft, about £250 fitted at quality independant rates in the East Midlands. If you are anywhere near Northampton I can vouch for both a franchised cit repair agent and an independant.
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide

Cold-snap snow-how: Advice on coping with the freezing weather, including videos, facts and winter driving advice.

Honest John's Guide To Winter Tyres