my friends aerial has been vandalised on his peugeot 306, 'Y' reg which has the roof mounted type.
Question; can the roof base & aerial be bought without the cable, and then be connected to the existing cable. ( the routing of a new cable appears a nightmare )
Secondary, can the headlining & internal light cluster be easier removed to expose the aerial fixing.
Many thanks in anticipation
|
Just replaced an aerial on a Y reg 406 estate, also roof mounted (car wash error!). The base and aerial were brought from the Peugeot main dealer for about £9.50. I also asked someone in their servicing department how to replace it, and they were very helpful. With the 406, the light cluster just flipped down with a screwdriver, and then two allen bolts were removed. This exposes a circular thing (amplifier?), and the aeriel base then just fitted into this.
Hope this helps
|
|
If you cannot get into the aerial terminals cut the new cable leaving a few inches.Join this to the old one by twisting and soldering the wires.Make sure no strands of screen are shorting to the centre wire and insulate with tape.
|
guys
many thanks for the invaluable advice.
completed the task very succesfully, thanks to the replies rec'd.
many thanks again, Kev the Rev
|
hi, i know this was posted last year however i'm a new user and have just the one question,
How did you remove the lightcluster, mine has the central locking in aswell.
thanks
|
|
|
|
The base and aerial were brought from the Peugeot main dealer for about £9.50. >> Hope this helps
If you had brought it from GSF Car Parts it would have cost half.
|
|
|
|
