I know various methods of removing rounded nuts have been discussed before but this is a product I have not seen before.
Not cheap but may be worth it for some jobs.
www.machinemart.co.uk/product.asp?p=040214678
|
I have some similar to these - been around for a few years. 'Locking wheel nut removal sockets' work on a similar principle. They work OK, but on the smaller diameter fasteners (14mm) they just tend to chew up even worse.
What I could really use is a set of left-handed drill bits to help in sheared stud removal.
|
Aprilla
What I could really use is a set of left-handed drill bits to help in sheared stud removal.
Try Frosts,
www.frost.co.uk/
Item G225
StarGazer
|
|
Thanks - I get the Frost catalogue but didn't spot those.
|
|
Both Snap-On and Mac do similar sets of these special sockets and i can confirm that they are abslutely superb, (although not cheap).
|
|
|
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/d55e71e457a6639e5ed6361e4af24bfa/e3333c4ca85cab1b6987777356cdb0cc.jpg)
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/3c974911001402d3ff01011cfb48a6c1/044e7bef33abe7b681feb9342416a8e4.jpg)
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/67291e97457e4516706f50547aa77fdc/20caa8d113fe311330ebefb8dea45b14.jpg)
:no_upscale():format(webp)/https://cdn.uk.prod.group-mobility-trader.com/images/cas/18bdab90b7a6ddc002435ca5f164b84a/2cb5abb88659eb854005151a47bc46b1.jpg)
