Peugeot 207 HDi - Peugeot 207 Rear Axle Bushes

Honest John Back Room » Technical matters
View Threaded
Thu 21 May 2015 08:55
Peugeot 207 HDi - Peugeot 207 Rear Axle Bushes - PLUG

I am about to replace the rear axle bushes on my 207 but I'm not sure at what angle the bushes should be fitted as they are not uniform but have a moulded in 'snubber' and some voids in the rubber. Does anyone know ?

Reply | Report as offensive | Link
Thu 21 May 2015 09:20
Peugeot 207 HDi - Peugeot 207 Rear Axle Bushes - jc2

Same as the ones you take off?

Reply | Report as offensive | Link
Thu 21 May 2015 09:36
Peugeot 207 HDi - Peugeot 207 Rear Axle Bushes - PLUG

I'm just concerned that the old busehs may be so damaged that I won't be able to tell. The bushes aren't uniform. They have some voids and a 'snubber' bar so need fitting at the correct angle.

Reply | Report as offensive | Link
Thu 21 May 2015 23:10
Peugeot 207 HDi - Peugeot 207 Rear Axle Bushes - hardway

There's a couple of pips on the bush,

they line up with a "square" slot on the carrier.

Edited by hardway on 21/05/2015 at 23:12

Reply | Report as offensive | Link