car not starting

I have a Mercedes-Benz E320 CDI which is not starting. Over 2 visits to my garage we have replaced the glow plugs, pre and main engine bay fuel pumps, filters, all hoses, fuel sensor, starter motor, injector seals and batteries in both keys. It started at the garage so I drove it home and left it for two days but then it wouldn't start. At my wits end - any thoughts?

Asked on 17 October 2012 by Richard Holling

Answered by Alan Ross

Well firstly does your car have BAS (brake assist)? If so then there is a known fault which affects starting, in that moisture corrosion gets into the BAS system (multi plug 3).

If so then sometimes it can be cleaned out or if not then the BAS control module has to be replaced.

Other than that, given all you have changed, hasn't the garage done a diagnostic check and if so what fault codes did they find?

We would have thought that a diagnostic would have been carried out in the first instance rather than just changing lots of items.

Tags: technical issues starting problem owning

Similar questions

Is the clicking noise when I turn my key indicative of a broken starter motor?

When I turn the ignition key, the lights come on the dashboard but there's just a clicking noise and the engine doesn't turn. I've charged the battery using a battery starter as it hadn't been driven in...

Why does the gear stick get stuck in third gear on my Citroen C4?

My Citroen C4 refused to start today. I can't move the gear stick from parking to any other position unless I press on the brakes. When I do move it, the message "put auto box in place" comes up. When...

What is causing the starting issue on my Mercedes-Benz A Class?

My 2012 Mercedes-Benz A class is suffering from a glitch with starting, as the ESP/ABS light comes on, unless I go through the starting steps very slowly (pausing for 10 - 15 seconds between each turn...