Ford Mondeo mk3 - Replacement Alloys - Mondeomartin

offered the chance to change my alloys from 225/40zr/18's to jaguar spec 245/45zr/17. Concerned over the additional width more than anything else as the actual circumference difference is within the accepted tolerance of +-2.5%. Additionally I take it that my insurance firm will also have a fit ?!

Ford Mondeo mk3 - Replacement Alloys - unthrottled

You'll have to fit one and see if there any clearance problems-esp when at full lock. The ET won't be vastly different but check that it isn't marginal in the first place. I assume the PCD is the same?

Make sure, the wheels don't protrude outside of the wheel arch or they will look silly. Insurance will depend on the company-some don't like it, others don't care.

tbh, it's not a great 'chance' and won't yield any non aesthetic benefits.

Ford Mondeo mk3 - Replacement Alloys - Bobbin Threadbare

I don't know very much about changing your alloys but I do have a mate whose insurance company refused to pay out after he totalled his car, as he had swapped his wheels out (he had a Mondeo ST220 but I shouldn't think it makes much difference what the car is).

It might be worth asking this question in the legal section here too.

Edited by Bobbin Threadbare on 20/06/2011 at 15:16